Wednesday, July 20, 2011

The (almost) $0 bathroom makeover Day 12-ish

CABINET IS DONE

The cabinets have doors and drawers back.  The coolest thing about doing the cabinet this way, is once we're done, the ugly counter top will be a second thought and barely noticable.  Just wait until the final pictures. 


The letters on the knobs were done with printer paper and copious amounts of wood glue.  I could have bought them at Hobby Lobby, but as we're doing this super cheap, there you are.  The best thing about the wood glue is I can varnish it and it should stay fairly intact for awhile.

We're still at just over $13. 

I'm going to frame the mirrors with some left over molding, but I don't have quite enough, so I will be making a trip to Home Depot.  The molding I used is very inexpensive so we shouldn't be adding too much.

A couple of quick notes on why I chose a few of the things I chose.  This is a kids' bathroom.  They aren't really known for cleaning up after themselves unless you're standing over them with a stick and a carrot.  SO, blue paint on the walls to match the toothpaste we use.  And the off-white, aged cabinet will hide dirt and grime.  Our new vinyl floor is also dark and non-slip, unlike the tile we covered, which was so slick that at night all I did was listen for falls. 

Here's what's left to do - shelves over the sink, shelves over the toilet, bathtub surprise, deepen the shelves in the closet and make room for a hamper.  And finally, trim everything out.  I'm probably going to have a few more expenses, but I'm still thinking this is going to come in under $50.  We'll see how accurately I can estimate.

Thursday, July 7, 2011

The (not quite) $0 bathroom makeover - Day 9 - 11

FLOORING AND HARDWARE

Problems and more problems. 

The Floor.
These are "looks like wood" vinyl tiles. The floor has to be SQUEAKY clean to get these suckers to stick, so I've spent a couple of days scraping, cleaning, sweeping, wiping, scrubbing to get it REALLY clean. Then I grabbed the isoprophyl alcohol and wiped each area down before laying the tile. Just to make sure. I have all the tiles down - the bad news? I'm short a few tiles. Somehow my math didn't calculate the area correctly. A quick trip to a flooring store, and (of course) my freebie tiles are so old and discontinued that they're unheard of.
Plan B
Buy some tiles that don't match at all, but will go nicely, and put in a pattern. I've done a little stripe that comes off the commode. I also did a diamond pattern to make it look purposeful - after all - it's a super low cost makeover. It's all done with purpose.
The good news is that these tiles were just over a dollar a piece, so at $13.50, not a bad deal.

Here is the finished floor.





The Hardware.

My spray painting idea is a flop. They painted nicely, but it just doesn't look good with the cabinet. I like the idea of staying with the porcelain since the other fixtures are porcelain, chrome and brushed nickle, so, I took a trip to one of my favorite inspiration stores - Hobby Lobby. 

They have a nice area devoted to knobs. I found some porcelain ones with letters and a circle around the letter. Very simple, and it gave it just that little extra that I think will work nicely on the doors. So now I get to figure out how to get the letters on the knobs. I tried the rub on route, and the sticker route, but they don't have what I'm looking for.
A quick search of the web turns up this font, which I will try to put on the knobs with glue, then dip in epoxy to set and seal them. The down side is I don't think I have epoxy.
My solution was to drown them in wood glue.  I got a little shine on them.  Not sure how well they'll hold up, but we'll find out.


Tune in next time when we finish the base of the cabinet and put our doors back on!!

Friday, July 1, 2011

The (almost) $0 bathroom makeover - Day 8

I'm still technically working on the cabinets.  I think I have a solution to my hardware problem.  I'm currently testing spray painting the porcelain knobs we have.  I'll let you know how it goes.  I may use those on the drawers and the pulls on the doors, or, but the knobs on the decorative drawers, since they won't be used much, and the pulls on everything that will be used.

It's a work in progress.

I'll be sanding the base of the cabinet today and staining so that it matches the doors.  The hinges were painted by the previous homeowner so I'm considering getting the paint off of those, which could be an issue.  We'll see how that goes as well.  :)

The primer and spray paint were leftovers from something else as well, so I'm still on $0 dollars.  So far, so good!!

Thursday, June 30, 2011

The (almost) $0 bathroom makeover - Day 7

I've been working on refacing the cabinets.  I went back and forth on color and ideas, but finally decided to stick with what we have, only age them a bit and give them a bit of a stain/glaze.

I have some stain for our exterior that will work nicely so I pulled off all the hardware and sanded off the paint on the edges and bits that stick up.



Next, I slathered on a layer of stain.



Once the stain covers the door, wipe it off using a dry towel or rag.  Stain will stick to the sanded off bits and in the corners, giving the doors a nice aged look.



I still don't have a final decision on the hardware.  I have some that turned up in the garage, but they don't really go with my aged cabinets now.  I may have to actually purchase something.. aaaahhhh... Tune in next time... for Hardware Wars.... (that's not mine btw, but it's a funny spoof... )
http://video.google.com/videoplay?docid=-9059800655908790019

Good times, good times.
OH.. and hopefully I'll have new batteries for the camera soon so the picture quality will be better.  Had to use the camera on the phone.

The (almost) $0 bathroom makeover - Days 3 - 6

CLEAN , PREP, PAINT
I cleaned the bathroom and got most of the kids things out of the way. This is the part where things get exciting, but don't skip any steps! TAPE TAPE TAPE to paint, or if you're really good, cut in all your corners and edges. I took all the doors off of the cabinets and the drawers and fake drawer faces are all out and off.

Imixed up a nice color using two of my no VOC paint colors from previous room paintings and cut in all my edges and corners.  I taped around the mirrors... just so I could get in behind them.  They're very difficult to remove.  I also taped around my light fixtures since removing them was tough as well.

We're looking good!  And so far, our spend is ZERO!

 
 
 



Next up is refacing our cabinets.

Wednesday, June 15, 2011

The (almost) $0 bathroom makeover - Day 2

INSPIRATION


I've been thinking about how I'd like the "kid's bathroom" to be fun but still beautiful, and something they can grow up in.  It will also have to be very undefined, not too femine or masculine - gender neutral.  So many gorgeous things were available to look at online, but here are a few of the more fun ideas with some of the colors I have available in my free leftover paint and I do have some boards and old MDF so I'm excited at the prospect of interpreting and implementing these ideas in my own way.

Tomorrow - we prep!!!

Monday, June 13, 2011

The (almost) $0 bathroom makeover.

Day 1.

BEFORE - Scavenge and Inspire

Here are the before pictures of the bathroom.  I'm going to keep with the sea theme of the shower curtain, but I'm going to age it a bit.  Most of the kids are older and this way, I only have to change the shower curtain, and not today.  :)




So aside from the messy kids, you can see most of the bathroom is pretty boring with a very dated yellow counter top.  I'm going to try to work with that.  Right now, there's a very old tile floor in the area with the bath and we're down to the plywood subfloor in the bathroom - painted a nice dirt brown to hide the mess and coated in a few coats of polyurethane to protect it from moisture.

Scavenging around I found the following materials to get me started.

Three different shades of blue/turquoise (one isn't shown) and a nice bright yellow.  I also have a brown that I'm thinking of using.


These tiles were left by the previous homeowner and match the tiles in our bathroom and the kitchen.  They would be good in the sink area of the bathroom.  They also left behind some vinyl "wood" sticky tiles.  Since this is a temporary flooring fix, I'm going to lay these in the bath area, and then reseal the bathtub and toilet.

This is left over MDF from some project or another.  I'm thinking these will be useful for shelves.. although.. I believe I also have some old solid wood shelves tucked away upstaires.  I may use those instead, or, I may use old fence boards and stain them for a more rustic sea side feel.

Coming up, some drawings or at least some images for inspiration!!